Philips S9711 - Page 34

Problem Possible cause Solution
The shaver is not
entirely clean after
I clean it in the
SmartClean system.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection between the
SmartClean system and
the shaver.
Press down the top cap (‘click’)
to ensure a proper connection
between the shaver and the
SmartClean system.
The cleaning cartridge
needs replacement.
Replace the cleaning cartridge
(see chapter ‘Cleaning and
maintenance’).
The cleaning cartridge is
empty.The replacement
symbol ashes to
indicate you have to
replace the cleaning
cartridge.
Place a new cleaning cartridge
in the SmartClean system
(see chapter ‘Cleaning and
maintenance’).
You have used another
cleaning uid than the
original Philips cleaning
cartridge.
Only use the Philips cleaning
cartridge.
The drain of the cleaning
cartridge might be
blocked.
Push the hairs down the drain
with a toothpick.
The shaver is not
fully charged after
I charge it in the
SmartClean system.
You have not placed
the shaver in the
SmartClean system
properly.
Press down the top cap (‘click’)
to ensure a proper connection
between the shaver and the
SmartClean system.
ENGLISH34