Philips S9731 - Page 37

Problem Possible cause Solution
The shaver is
not entirely
clean after I
clean it in the
SmartClean
system.
You have not placed
the shaver
in the SmartClean
system properly,
so there is no
electrical connection
between the
SmartClean system
and the shaver.
Press down the top cap
(‘click’) to ensure a proper
connection between the
shaver and the SmartClean
system.
The cleaning
cartridge needs
replacement.
Replace the cleaning
cartridge (see chapter
‘Cleaning and maintenance’).
The cleaning
cartridge is empty.
The replacement
symbol ashes to
indicate you have to
replace the cleaning
cartridge.
Place a new cleaning
cartridge in the SmartClean
system (see chapter
‘Cleaning and maintenance’).
You have used
another cleaning
uid than the original
Philips cleaning
cartridge.
Only use the Philips cleaning
cartridge.
The drain of the
cleaning cartridge
might be blocked.
Push the hairs down the
drain with a toothpick.
ENGLISH 37