EasyManua.ls Logo

Philips SBC HC210 - Specifications

Philips SBC HC210
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
English
Maintenance – If the headphone will not be used for a longer time,
please remove the batteries to prevent leakage and
corrosion.
– Only replace the batteries with Philips SBC HB550S
batteries.
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter. Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Troubleshooting Specifications*
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
System: Infra Red (IR)
Modulation: Frequency Modulation (FM)
Effective Transmission Range: 7 meters max. range (depending on ambient conditions
and restricted to line of sight w.r.t. the transmitter)
Input level: 800 mVrms (1 kHz sine wave)
Power supply – transmitter: 12Volt / 200 mA DC, centre positive
Power supply – headphone: 2x 1.2V RO3 (AAA)
Philips SBC HB550S batteries (NiMH)
Carrier Frequency
(Headphone): 2.3 Mhz (L), 2.8 Mhz (R)
Signal/Noise ratio: > 55 dB (1 kHz sine wave , A-weighted)
Distortion: < 1% THD
Channel separation: > 30 dB
is a trademark of SRS Labs, Inc.
Headphone technology is incorporated under license from SRS Labs, Inc.
*) All specifications are subject to change without prior notice.
XP SBC HC 210.1 SRS 07-04-2003 10:22 Pagina 9

Related product manuals