What to do if my Philips Signage Solutions Q-Line 55BDL3050Q show no picture?
If your Philips Displays show no picture, the issue might be due to several reasons: * The power cord might be disconnected; plug it in. * The main power switch on the back of the display might not be switched on; ensure it is on. * The selected input might have no connection; connect a signal to the display. * The display might be in standby mode.
Why can I see a picture but hear no sound on my Philips Displays?
If you can see a picture but hear no sound on your Philips Displays, consider the following possibilities: 1. The source signal cable might be improperly connected; ensure both video and sound inputs are correctly connected. 2. The volume might be turned all the way down; press the volume buttons to increase the sound. 3. Mute might be turned on; switch Mute off by using the appropriate button. 4. No external speakers might be connected; connect external speakers and adjust the volume to a suitable level.
What to do if I can hear sound, but no picture on Philips Signage Solutions Q-Line 55BDL3050Q Displays?
If you can hear sound but see no picture on your Philips Displays, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
To Next Page
General