What to do if my Philips Displays shows no picture?
If your Philips display shows no picture, there might be several reasons. First, ensure the power cord is properly plugged in. Then, check that the main power switch at the back of the display is turned on. Also, verify that a signal connection is established with the display. It is also possible that the display is in standby mode.
Why can I see picture but no sound on my Philips BDL4678XL?
If you can see a picture on your Philips display but hear no sound, there are a few potential causes. First, ensure that both video and sound input cables are correctly connected. Also, verify that the volume isn't turned all the way down by pressing the [VOL UP] or [VOL DOWN] button. Check if [MUTE] is turned on and switch it off using the [MUTE] button. Finally, make sure external speakers are connected and the volume is set appropriately.
What to do if I can hear sound but no picture on Philips Displays?
General| Display diagonal | 116.8 cm |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Technology | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Viewing Angle | 178° |
| Viewing angle, horizontal | 178° |
| Viewing angle, vertical | 178° |
| Response Time | 8 ms |
| Display colors | 16.7 million |
| HD type | Full HD |
| HDMI ports quantity | 2 |
| DVI port | Yes |
| DisplayPort quantity | 1 |
| USB version | 2.0 |
| Built-in speaker(s) | Yes |
| Number of speakers | 2 |
| RMS rated power | 20 W |
| VESA mounting | Yes |
| VESA mounting interfaces | 200 x 200 mm |
| Product color | Black |
| Weight | 22.3 kg |
| Power Consumption | 150 W |
| Screen Size | 46 in |
| Pixel pitch | 0.53 mm |
| Input Ports | HDMI, DVI, DisplayPort, USB |
To Next Page
