Philips Sonicare 2 Series - Preparing for use; Using the appliance; Brushing instructions

Battery status (when handle is not on charger)
- A yellow battery level indicator indicates a low charge.
- A green battery level indicator indicates a high charge.
- The battery level indicator turns off when the battery is in between
a low and a high charge.
Note: When you hear 3 beeps and the battery level indicator ashes yellow,
this means the battery is below 10% and should be recharged.
Note: To keep the battery fully charged at all times, you may keep your
Sonicare on the charger when not in use.
Features
Quadpacer (specic types only)
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth. The Quadpacer
feature works at all 3 intensity levels (Fig. 7).
Smartimer
The Smartimer indicates that your brushing cycle is complete when it
automatically turns off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing at least 2 minutes twice a day.
Note: If you press the power on/off button after you started the brushing cycle,
the toothbrush will pause. After a pause of 30 seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the rst 14 brushings
to ease into the Sonicare experience.
This Sonicare model comes with the Easy-start feature activated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 Activate or deactivate Easy-start:
ENGLISH10