1 Empty mouthwash from Fill & Charge station
reservoir and handle reservoir.
2 Fill the station reservoir with warm water.
3 Place handle in handle cup and engage with Fill
& Charge station; letting the station fill the
handle until the motor stops (10 seconds).
4 Eject the AirFloss handle and handle cup from
the Fill & Charge station, but do not remove the
AirFloss handle from handle cup. Re-engage
AirFloss handle and handle cup to run the Fill &
Charge station a second time.
5 Repeat this once more for a total of three fill
cycles.
6 Eject the handle cup and remove the AirFloss
handle from the handle cup. Press and hold the
activation button to flush the handle until the
handle reservoir is empty.
7 Empty water from the Fill & Charge station
reservoir.
17
English
Downloaded from www.vandenborre.be
To Next Page
Loading...
