3 Using a Phillips-head screwdriver, remove the 2
screws shown in the image. Also remove the 2
screws beneath the rubber feet.
4 Remove the screws and plastic bottom of the
Fill & Charge station.
5 Cut the wires to separate the rechargeable
batteries from the appliance.
6 Dispose of the batteries properly.
AirFloss handle
Please note that this process is not
reversible.
1 To deplete the battery, repeatedly press the
activation button until the AirFloss no longer
produces any bursts of air.
2 Remove the AirFloss nozzle from the handle.
22
English
Downloaded from www.vandenborre.be
To Next Page
Loading...
