Philips Sonicare AirFloss - Preparing for Use; Step-by-Step Setup

Note: When the charge indicator ashes yellow,
the battery is low and needs to be recharged
(fewer than 3 uses left).
Preparing for use
1 Align the nozzle so the tip faces the front
of the handle and press the nozzle down
onto the handle (‘click’).
Note: Replace the nozzle every 6 months for optimal
results. Also replace the nozzle if it becomes loose or
no longer clicks onto the handle.
2 Open the cover of the reservoir (‘click’).
3 Fill the reservoir with mouthwash or water.
Note: To operate effectively, the AirFloss has to
contain either mouthwash or water.
Tip: For a fresher experience, use mouthwash instead
of water.
Note: Do not use mouthwash that contains isopropyl
myristate, as it may damage the appliance.
4 Close the cover of the reservoir (‘click’).
5 Press the on/off button.
, The green charge indicator lights up.
ENGLISH 9