Battery status (when handle is not placed on charger)
When removing the handle from the charger, the battery light at
the bottom of the handle will indicate the status of the battery.
LED color
Number of beeps Status
Solid green n/a Full
Flashing green n/a Medium
Flashing amber 3 Low
Flashing amber 5 Battery empty
Note: Your toothbrush comes pre-charged for first use. After
first use, charge for at least 24 hours.
Note: It is OK to leave the handle on the plugged in charger in
between brushings. This will not impact the battery life
negatively.
Activating or deactivating features
You can activate or deactivate the following features of your
toothbrush:
-
EasyStart
-
Brush head replacement reminder
-
Pressure sensor
1 Place the handle on the charger.
2 Press and hold the power button for:
Feature
Press the power button for
EasyStart 3 seconds
18
English
To Next Page
Loading...
