Using the appliance
Bluetooth connectivity
Before you start the connectivity procedure, make sure your mobile
device runs on Bluetooth 4.0 or higher.
Note: For the latest information on device compatibility, please
visit the App Store or Google Play.
Connecting your toothbrush
1 When used in connected mode, the Philips Sonicare app gives you
the opportunity to receive real-time feedback on brushing, store
and share brushing data with your dentist (if you so choose), and
receive personalized coaching. If you wish to use the toothbrush in
unconnected mode, the toothbrush will still function. To use the
toothbrush in connected mode, please follow the instructions
below.
2 Download the Philips Sonicare app from the Apple App Store or
Google Play Store.
3 Confirm Bluetooth is switched on on your mobile device before
you open the app. Check the settings on your mobile device to
switch on Bluetooth.
4 To connect the toothbrush to the app, switch on
thetoothbrushby pressing either the power on/off button or the
brushing mode button. Make sure thetoothbrush is not on the
charger when you switch it on.
5 Open the Sonicare app.
6 Follow the Sonicare app instructions displayed on your mobile
device. The app automatically connects with the toothbrush. If the
toothbrush does not connect, follow the troubleshooting steps
provided in the app.
Note: For optimal data capture, keep your mobile device close during
brushing.
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
12
English
To Next Page
Loading...
