Using your Philips Sonicare
Brushing instructions
1 Attach your desired brush head (see 'Brush
heads'). Align the brush head so the bristles
point in the same direction as the front of the
handle.
2 Wet the bristles.
3 Apply a small amount of toothpaste on the
bristles.
4 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing rmly to
make the bristles reach the gumline or slightly
beneath the gumline. A change in vibration (and
a slight change in sound) and activation of the
light ring alert you when you apply too much
pressure while brushing.
Note: Keep the center of the brush in contact
with the teeth at all times.
15
English
4235_021_2499_1_Booklet_Lux_A6_US_v1.indd 15 13/02/17 16:38
To Next Page
Loading...
