My Philips Sonicare Toothbrush is not turning on
Is your Philips Sonicare Toothbrush not turning on anymore? If there are no vibrations when
pressing the power button, you might want to use these possible causes and solutions to try and
solve this issue yourself.
The handle is empty or not fully charged
Do you see the battery indicator blinking or do you hear a beep when you put the handle on the
charger? If yes, this means that the handle is working properly but needs to be fully charged first.
Fully charge your Philips Sonicare Toothbrush. This can take up to 24 hours.
The power button is stuck
Toothpaste or debris could get inside the small gap around the power button. This might cause
the power button to get stuck and not properly functioning anymore. Clean the power button and
the area around it with a damp cloth to make sure it is free of debris.
Outlet is not working
Try another appliance in the same outlet. If that appliance is also not working, the issue might be
at the outlet. Try a different outlet to fully charge your Philips Sonicare Toothbrush. You might
need to reset a GFCI outlet.
Not using the original charger
Make sure that you use the original charger that came with your Philips Sonicare Toothbrush.
Charging components are not interchangeable.
To Next Page
Need help?
General
