23
English
3 Place the brush head on one of the 2 pegs
in the sanitizer with the bristles facing the
light bulb.
Note: Only clean Philips Sonicare snap-on
brush heads in the sanitizer. The UV
Sanitizer is designed to fit all snap-on
Sonicare brush heads.
4 Make sure the sanitizer is plugged into a live
outlet of appropriate voltage.
5 Close the door and press the green power
on/off button once to select the UV clean
cycle.
-
The sanitizer is in operation when the light
glows through the window.
Note: You can only turn on the sanitizer if
the door is properly closed.
Note: The sanitizer stops if you open the
door during the sanitizing cycle.
Note: The sanitizer cycle runs for 10 minutes
and then automatically shuts off.
Cleaning
Note: Do not clean the brush head, handle,
travel case or the UV sanitizer in the
dishwasher.
To Next Page
Loading...
