1 Switch off the shaver.
2 Pull the shaving head holder off the bottom
part of the shaving unit.
3 Rinse the hair chamber and shaving head
holder under the tap.
4 Turn the retaining ring counter clockwise
and lift it off the shaving head.
Repeat this process for the other retaining
rings. Place them aside in a safe place.
5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and comb.
Note: Do not clean more than one cutter
and comb at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving comb, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and comb under the tap.
7 Shake off excess water.
8 Put the cutter back into the comb.
25
English
To Next Page
Loading...
