5
3 Get started
Warning
•
To avoid any potential hazard, use the power source
supplied by your local authorities.
1 Plug the power strip into a properly
grounded outlet.
2 Plug the electric appliances into the power
strip.
3 Switch the circuit breaker to RESET ( ).
4 Press TIMERRESET to erase the programs
before the setup (
).
Tip
•
You can use a tiny slim tool to press TIMERRESET.
•
In case of electrical overload, the circuit breaker will
switch to OFF automatically to protect your appliances.
You can switch to RESET to turn it on.
b
a
English
EN
To Next Page
Loading...