Philips SRP2018/27 User Manual

English
EN 7
Auto registration
1
Switch on your device.
2
Press and hold the device selection button (e.g. TV) for 5 seconds
until the red LED is on.
3
Point at your device with the universal remote. Then press and
release
to start searching the code for your brand. A different
infrared signal is sent every 2 seconds as the universal remote
searches, indicated by a red ash.

Philips SRP2018/27 Specifications

General

Brand	Philips
Model	SRP2018/27
Category	Remote Control
Language	English