Philips SRP2024A/27 User Manual

7
Programming Your Remote
Code List.
4. Use the number buttons on the
remote to enter the rst 4-digit
remote code you circled in the Code
List in Step 1. The red light will turn
o after entering the fourth digit.
5. Point the remote at the device.
Test the buttons on the remote to
see if the device responds as you
would expect. If the buttons do not
operate the device, return to Step
2 above and use the next code that
you circled for that device.
6. Repeat Steps 1 – 5 for each device you wish
to control.
Programming Notes
• Some codes may operate only a few functions
of your device. There may be another code in
the Code List that controls more functions.
Test other codes in the Code List for more
functionality.
• If you do not nd a remote code that works your
device or there are no codes in the Code List for
your device, use the Auto Code Search method
in the next section to program your remote.
• For combination devices such as a TV/DVD
combo or TV/VCR combo, you may have to enter
a code for each device. (See Controlling Combo
Devices.)
• Write down the remote codes used to program
the remote for future reference.
A
1 2 3
4 5 6
7
(-)
8
0
9
B C D
MENU
INPUT
TV
STR
DVD
AUD
EXIT
OK
ENTER
SETUP
SLEEP
CH
A
1 2 3
4 5 6
7
(-)
8
0
9
B C D
MENU
INPUT
TV
STR
DVD
AUD
EXIT
OK
ENTER
SETUP
SLEEP
CH

Philips SRP2024A/27 Specifications

General

Brand	Philips
Model	SRP2024A/27
Category	Remote Control
Language	English