6 EN
4
Enter the rst 5-digit code using the digit buttons.
5
If the light is off, a valid code is saved. Otherwise, the light will ash once,
and then remains on for code re-entry.
6
Operate the device with the universal remote. If your device responds
correctly, it means you have entered the right code. Otherwise, repeat
from step 2, and enter the second code on the list.
Note
•
It is possible sometimes that your device only responds to some of the buttons. In such case,
set up with the next code in the code list, and try operating your device again.
To Next Page
Loading...
