Philips SRP9263C/27 User Manual

11
Using your remote
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the desired device
button (TV, DVD, STR, AUD) you
would like the code for.
3. Press and release the ENTER button.
4. Press and release the #1 button.
Count the number of times the
remote light ashes. This is the
number corresponding to the rst
digit of the code. Repeat the process
by pressing the #2, #3 and #4
buttons for the remaining digits.
5. Press and release the ENTER button
to exit this mode.
Code identication
Reset to factory settings
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the MUTE button.
3. Press and release the number #0
button. The red indicator light will
ash twice.
SETUP
SETUP
ENTER
ENTER
00
11
22
33
44
55
66
77
88 99
00
SRP4229B_07 ENG Manual v2.indd 11SRP4229B_07 ENG Manual v2.indd 11 9/2/21 5:03 PM9/2/21 5:03 PM

Philips SRP9263C/27 Specifications

General

Brand	Philips
Model	SRP9263C/27
Category	Remote Control
Language	English