10
Using your remote
Primary Audio Control
The Primary Audio Control feature allows you to
select a single device that the volume buttons
always control. For example, the remote can be
in TV mode while the volume buttons control
the volume on your audio receiver or sound bar
instead of your TV.
Enabling Primary Audio Control
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the device button
(TV, AUD, etc.) on the remote for the
device you wish to control
the volume.
3. Press and release the MUTE button.
4. Press and release the VOL button.
The red light will blink twice and
turn o.
Disabling Primary Audio Control
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the device button
(TV, AUD, etc.) programmed to control
the Primary Audio Control feature.
3. Press and release the MUTE button.
4. Press and release the VOL button.
The red light will blink twice and
turn o.
SETUP
SETUP
VOL
SRP4229B_07 ENG Manual v2.indd 10SRP4229B_07 ENG Manual v2.indd 10 9/2/21 5:03 PM9/2/21 5:03 PM
To Next Page
Loading...
Need help?
General
