Philips SRU 5130/86 - English; 1 Your Universal Remote Control; 2 Installing the Remote Control; Table of Contents

Table of contents
1 Your universal remote control 3
2 Installing the remote control 3-6
2.1 Inserting the batteries 3
2.2 Testing the remote control 4
2.3 Setting the remote control 4-6
3 Keys and functions 7-8
4 Extra possibilities 8-9
4.1 Adjusting device selection (Mode keys) 8-9
4.2 Restoring the original remote control settings 9
5 Frequently asked questions 10
6 Need help? 11
Code list of all brands / equipment 80-93
Information to the Consumer 97
1 Your universal remote control
Congratulations on your purchase and welcome to Philips.
To fully benefit from the support that Philips offers, register your product
at www:philips.com/welcome.
For quick, clean and easy setup go to: www.philips.com/urc
After installing the universal remote control SRU 5130 you can operate a
maximum of 3 different devices with it:
TV, Set Top Box (satellite or cable decoder, digital terrestrial television),
DVD player/HDD/recorder or VCR.
2 Installing the remote control
2.1 Inserting the batteries
Press the cover inwards and slide it in the direction of the arrow.
Place two AAA type batteries into the battery compartment, as
shown.
Replace the cover and click it firmly into place.
3
2
1
1
1
3Installing the remote control
ENGLISH