Philips Steam&Go - Troubleshooting Continued; Water Dripping, Leaks, and Sounds; Stains and Impurities from Steamer

22
Problem Possible cause Solution
Water
droplets
drip from
the steamer
head.
The steamer has
not heated up
suciently.
Let the steamer heat
up for 45 seconds
(steam-ready lights
up). The steamer is
ready to be used
when the light goes
o.
The steamer
produces
a pumping
sound/
the handle
vibrates.
Water is pumped to
the steamer head
to be converted
into steam.
This is normal.
Water inside the
tank has all been
used up.
Rell the water tank.
Water leaks
from the
water tank.
Water tank lling
door is not closed
properly
Ensure that lling
door is closed
properly.
Steam leaves
stains on the
garment or
impurities
come out of
the steamer
head
Apart from tap
water, you have
lled other liquids /
additives or
descaling agents
into the water tank.
Use only tap,
demineralized or
ltered water when
lling up the water
tank.