Philips T315XW02VD01 - Model T420 XW01 V8 Disassembly Procedures

Mechanical Instructions
EN 23LCD AUO 2k7 4.
4.10 Model T420XW01V8
4.10.1 Control Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-73 Control board location
2. Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-74 Cover screws removal
3. Lift the cover from the Control board.
Figure 4-75 Lift cover
4. Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-76 Unplug FPCs
5. You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-77 Correct FPC insertion
H_16901_001.ep
s
17100
7
H_16901_002.ep
s
171007
H_16901_003.ep
s
17100
7
H_16901_004.ep
s
17100
7
H_16900_007.eps
110707