Philips T315XW02VD01 - Page 24

Mechanical Instructions
EN 24 LCD AUO 2k74.
4.10.2 Inverter Board(s)
Disassembly Master Inverter
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-78 Remove Inverter cover screws
Figure 4-79 Remove Inverter cover
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Figure 4-80 Remove Inverter connectors
4. Unplug connector on the Inverter board (see figure below)
and remove the inverter panel.
Figure 4-81 Remove connector
Reassembly Master Inverter
To reassemble, perform all processes in reverse order.
H_16901_005.ep
s
17100
7
H_16901_006.ep
s
17100
7
H_16901_007.ep
s
17100
7
H_16901_008.ep
s
17100
7