7 Other features
Set the alarm timer
This product can be used as an alarm
clock. You can select the disc, radio, or
mp3 files on a USB storage device as
alarm source.
Note
Alarm timer is not available in AUDIO N
mode.
f CD/IJSB source is selected, but no disc is
placed or no USB device is connected, the
radio source is selected automatically.
I
2
3
4
5
6
14
Make sure that you have set the
clock.
In standby mode, press and hold
SLEEP/TIMER for more than 2
seconds.
The hour digits blink.
Press 1<4 repeatedly to set the
hour, and then press SLEEP/TIMER
to confirm.
The minute digits blink.
to set the minute,
and then press SLEEP/TIMER to
confirm.
L+ The last selected alarm source
blinks.
Press »I to select an alarm
source (disc, USB or FM radio),
and then press SLEEP/TIMER to
confirm.
1-+ xx blinks (XX indicates the
volume level of alarm).
Press to set the alarm
volume, and then press
SLEEP/TIMER to confirm
EN
Activate/deactivate alarm timer
n standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate
timer.
1-+ If timer is activated, is displayed.
n standby, you may press and hold
CLOCK to toggle clock display on
or off.
Set the sleep timer
This music system can switch to
standby automatically after a set period
of time.
When the music system is turned
on, press SLEEP/TIMER repeatedly
to select a set period of time (in
minutes).
When sleep timer is activated, 7z
is displayed.
To deactivate sleep timer
Press SLEEP/TIMER repeatedly
until [OFF] (sleep off) is displayed
When sleep timer is deactivated,
disappears.
Listen to an external
device
You can listen to an external device
through this unit with an MP3 link cable.
2
3
Connect an MP3 link cable (not
supplied) between:
AUDIO INjack (3.5 mm) on the
product,
• and the headphone jack on an
external device.
Press AUDIO IN repeatedly to select
AUDIO IN source.
Start to play the device (see the
device user manual).
To Next Page
Loading...
