Philips TAT1235 - User Manual

TAT1235

Philips TAT1235 Specifications

General

Bluetooth version	5.0
Battery life	6 hours
Charging case battery life	18 hours
Water resistance	IPX4
Driver size	6 mm
Type	In-ear
Driver	Dynamic
Impedance	16 ohm
Sensitivity	101 dB
Frequency response	20 - 20, 000 Hz

Summary

Important safety instructions

Hearing Safety

Guidelines for safe listening volumes and avoiding hearing damage.

General information

Instructions to avoid damage, malfunction, and operating/storage conditions.

Your Bluetooth wireless earpieces

Get started

Charge the battery

Instructions on charging the earpieces and charging case.

Battery LED indicator on Charging case

Pair the earpieces with your Bluetooth device at the first time

Step-by-step guide for initial Bluetooth pairing.

Use your earpieces

Connect the earpieces to your Bluetooth device

Instructions for reconnecting paired earpieces.

Single earpieces pairing (Mono mode)

Guide for pairing and using a single earpiece.

Pair the earpieces with another Bluetooth device

Manage your calls and music

Controls for handling calls and music playback.

LED indicator status

Factory reset the earpieces

Technical data

Frequently asked questions

I cannot pair my Bluetooth earpieces with my Bluetooth device.

Troubleshooting steps for Bluetooth pairing issues.

Pairing does not work.

How to reset pairing.

Procedure to reset the Bluetooth pairing settings.

I hear sound from only one earpiece.