Need help?Do you have a question about the Philips TAT1138 and is the answer not in the manual?
General| Cable length | 0.2 m |
|---|---|
| Control type | Buttons |
| Headset type | Binaural |
| Product type | Headset |
| Product color | Blue |
| Wearing style | In-ear |
| Recommended usage | Calls/Music |
| Protection features | Sweat resistant, Splash proof |
| Works with the Google Assistant | Yes |
| International Protection (IP) code | IPX4 |
| Battery type | Built-in battery |
| Battery capacity | 30 mAh |
| Battery recharge time | 2 h |
| Number of batteries supported | 3 |
| Battery capacity (charging case) | 250 mAh |
| Continuous audio playback time (with charging case) | 15 h |
| Package type | Box |
| Package depth | 37 mm |
| Package width | 95 mm |
| Package height | 118 mm |
| Package weight | 98 g |
| Cables included | USB Type-C |
| Wireless range | 10 m |
| Bluetooth version | 5.3 |
| Bluetooth profiles | A2DP, HFP, AVRCP |
| Connectivity technology | Wireless |
| Master (outer) case width | 222 mm |
| Master (outer) case height | 245 mm |
| Master (outer) case length | 265 mm |
| Master (outer) case weight | 2972 g |
| Shipping (inner) case width | 105 mm |
| Shipping (inner) case length | 120 mm |
| Shipping (inner) case weight | 332 g |
| Quantity per master (outer) case | 24 pc(s) |
| Quantity per shipping (inner) case | 3 pc(s) |
| Impedance | 16 Ω |
| Driver type | Dynamic |
| Driver unit | 13 mm |
| Ear coupling | Intraaural |
| Headphone frequency | 20 - 20000 Hz |
| Maximum input power | 5 mW |
| Headphone sensitivity | 125.9 dB |
| Microphone type | Built-in |
Weight and Dimensions| Depth | 29.7 mm |
|---|---|
| Width | 18.5 mm |
| Height | 20.2 mm |
| Weight | 37 g |
| Charging case dimensions (W x D x H) | 31.1 x 59.5 x 32 mm |
Guidelines for safe listening volumes and practices to prevent hearing damage.
Precautions to avoid damage or malfunction, and operating/storage temperature guidelines.
Instructions for charging the earpieces and the charging case using the USB-C cable.
Guides on how to insert and wear the earpieces for a secure fit.
Steps to connect the earpieces to a Bluetooth device for initial use.
Steps to establish a Bluetooth connection between the earpieces and your device.
Addresses the issue of earpieces not powering on, suggesting battery charge.
Troubleshooting steps for pairing failures, including Bluetooth enablement.
Solutions for pairing issues, such as removing previous devices and re-pairing.
Steps to resolve disconnections between the left and right earpieces.
To Next Page
