Philips TAT1138 User Manual

Single earpiece (Mono mode)
Take either right or left earpiece out
from charging case for Mono use. The
earpiece will power on automatically.
Philips TAT1138
The following example shows you
how to pair the earpieces with your
Bluetooth device.
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT1138.
Enter the earpieces' password “0000”
(4 zeros) if prompted. For those
devices featuring Bluetooth 3.0 or
higher, there is no need to enter a
password.
1
2
 Voice assistant is disabled in Mono mode.
 Take the second earpiece from the charging case
and they will pair with each other automatically.
7 EN
Note
 The earpieces store 4 devices in the memory.
If you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Pair the earpieces with
another Bluetooth device
If you want to pair another Bluetooth
device with the earpieces, just press and
hold MFB on both earpieces 5 seconds
into pairing mode and put back in the
charging case, then re-take out from the
charging case, discover the second device
as per normal pairing.
Note
05"

Philips TAT1138 Specifications

General

Cable length	0.2 m
Control type	Buttons
Headset type	Binaural
Product type	Headset
Product color	Blue
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Sweat resistant, Splash proof
Works with the Google Assistant	Yes
International Protection (IP) code	IPX4
Battery type	Built-in battery
Battery capacity	30 mAh
Battery recharge time	2 h
Number of batteries supported	3
Battery capacity (charging case)	250 mAh
Continuous audio playback time (with charging case)	15 h
Package type	Box
Package depth	37 mm
Package width	95 mm
Package height	118 mm
Package weight	98 g
Cables included	USB Type-C
Wireless range	10 m
Bluetooth version	5.3
Bluetooth profiles	A2DP, HFP, AVRCP
Connectivity technology	Wireless
Master (outer) case width	222 mm
Master (outer) case height	245 mm
Master (outer) case length	265 mm
Master (outer) case weight	2972 g
Shipping (inner) case width	105 mm
Shipping (inner) case length	120 mm
Shipping (inner) case weight	332 g
Quantity per master (outer) case	24 pc(s)
Quantity per shipping (inner) case	3 pc(s)
Impedance	16 Ω
Driver type	Dynamic
Driver unit	13 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Maximum input power	5 mW
Headphone sensitivity	125.9 dB
Microphone type	Built-in

Weight and Dimensions

Depth	29.7 mm
Width	18.5 mm
Height	20.2 mm
Weight	37 g
Charging case dimensions (W x D x H)	31.1 x 59.5 x 32 mm