2
TSU9600 Starter’s Guide
ENGLISH
The Pronto System
The Pronto System contains a variety of equipment that is connected and configured to interact with
each other. The scheme below shows a possible connection with several A/V equipment.
Configuration of the Pronto Control Panel
To set up a Pronto System and configure the Control Panel as the central unit of the system, you
need different tools. The scheme below indicates the different tools, their significance in the
configuration of the Pronto system and their mutual connection.
Wireless
Access Point
Router Pronto Serial Extender
Pronto
Control Panel
Multimedia
Server
Lutron
light system A/V receiver TV A/V equipment
A/V equipment
• Install and wire the
components
Ethernet IP
RS-232
Ethernet IP
Wireless Access
Point/ Router
Pronto Control Panel
• Set Control Panel Settings
Configuration
Tool
• Configure
Extenders Network
Settings
• Update Extenders
firmware
Extenders
• Set hardware switches
• Connect to A/V equipment
and/or Wireless Access
Point/Router
TV
IR
Wired IR
Wired IR
Sensor
RS-232
Relay
Download USB cable
Configure Crossed Ethernet
ProntoEdit Professional
• Customize configuration file
• Assign or learn codes
• Match extenders to devices
• Set Control Panel Settings
Discovery
Tool
RF
Wired IR
To Next Page
Loading...
