To Next PageTo Next Page
Need help?Do you have a question about the Philips US2-MANT410 and is the answer not in the manual?
Connect the supplied coaxial cable to the back of the antenna.
Connect the supplied coaxial cable from the antenna to the back of your TV.
Connect the power transformer from the antenna to an AC power outlet.
Orient the antenna towards the signal source (transmitter) for optimal reception.
Face the antenna towards the signal source (transmitter) for best results.
Position dipoles for VHF channels 2-6 horizontally, and 7-13 in a "V".
Extend FM dipoles to 30" and position them vertically or horizontally.
Rotate and/or tilt the center loop towards the transmitter for UHF channels.
Choose your signal source by switching the selector from ANTENNA to CABLE.
Slowly increase gain until clearest picture; avoid excessive gain.
Connect the supplied coaxial cable to the back of the antenna.
Connect the supplied coaxial cable from the antenna to the back of your TV.
Connect the power transformer from the antenna to an AC power outlet.
Orient the antenna towards the signal source (transmitter) for optimal reception.
Face the antenna towards the signal source (transmitter) for best results.
Position dipoles for VHF channels 2-6 horizontally, and 7-13 in a "V".
Extend FM dipoles to 30" and position them vertically or horizontally.
Rotate and/or tilt the center loop towards the transmitter for UHF channels.
Choose your signal source by switching the selector from ANTENNA to CABLE.
Slowly increase gain until clearest picture; avoid excessive gain.
Outer Carton| outer carton dimensions | 11.4 x 9.3 x 12.6 inch |
|---|---|
| nett weight | 3.768 lb |
| gross weight | 5.291 lb |
Amplification and Reception| amplification | 46 dB |
|---|---|
| vhf dipoles length | 44 inch |
| low noise amplification | ensures great reception range |
Weight and Dimensions| packaging dimensions | 8.6 x 11.6 x 5.2 inch |
|---|---|
| nett weight | 1.884 lb |
| gross weight | 2.337 lb |
