To Next PageTo Next Page
Need help?Do you have a question about the Philips US2-MNT310F and is the answer not in the manual?
Connect the supplied coaxial cable to the back of the antenna.
Connect the supplied coaxial cable from the antenna to the back of your TV.
Connect the power transformer from the antenna to an AC power outlet.
Face the antenna towards the source of the signal (transmitter) for best reception.
Position the dipoles for VHF reception, adjusting length and angle as shown.
Position the dipoles for FM reception, extending them to 30" and positioning them vertically or horizontally.
For UHF reception, rotate and/or tilt the center loop towards the transmitter.
Slowly increase the gain until you achieve the clearest picture possible.
Connect the supplied coaxial cable to the back of the antenna.
Connect the supplied coaxial cable from the antenna to the back of your TV.
Connect the power transformer from the antenna to an AC power outlet.
Face the antenna towards the source of the signal (transmitter) for best reception.
Position the dipoles for VHF reception, adjusting length and angle as shown.
Position the dipoles for FM reception, extending them to 30" and positioning them vertically or horizontally.
For UHF reception, rotate and/or tilt the center loop towards the transmitter.
Slowly increase the gain until you achieve the clearest picture possible.
General| Brand | Philips |
|---|---|
| Model | US2-MNT310F |
| Category | TV Antenna |
| Language | English |
