Need help?Do you have a question about the Philips Videopac Computer G7000 and is the answer not in the manual?
General| Processor | Intel 8048 |
|---|---|
| CPU Clock Speed | 1.79 MHz |
| RAM | 64 bytes |
| ROM | 1 kB |
| Colors | 8 |
| Power Supply | External AC adapter |
| Sound | Mono |
| Media | Cartridge |
| Ports | 2 joystick ports |
| Input | Joystick |
Connect handsets and mains adapter to the keyboard, then connect the mains plug.
Replace TV aerial plug with output connector and connect keyboard to mains supply.
Switch on TV, warm it up, select a TV programme slot for the Videopac Computer.
Handle the Videopac carefully, store it in its box when not in use, and remove the plug to switch off.
Details include microprocessor, keyboard, joystick controls, safety standards, sound, and memory.
Insert the Videopac cartridge firmly into the slot in the keyboard.
Tune the TV preselector on UHF Channel 32 until a picture is displayed.
Touch RESET (△), adjust volume, and refer to the Videopac instructions for the inserted game.
To Next Page