When you press this key, the basic message will be displayed, replaced (at the
specified times) by the interrupt message. If you w ish to stop the display press any
key except RESET. The question mark w ill be displayed, and you can then press
key 5.
Press key 5
While the messages are displayed, the time of day is shown on the screen. This is
replaced every few seconds by a row of zeroes. You can enter three words here to
replace the time display. Type in 3 words of 8 letters each. These words should be
type continuously, with spaces where necessary. For example:
VIDEOPACCOMPUTER G7000 or JONES QUALITY PRODUCTS. If the last word
is less than 8 letters, finish off with spaces.
You have now entered your messages. The last two keys allow you to change the
colour on the screen, and correct mistakes in your messages.
To Next Page
Loading...
