41
button ( ) until the “ByeBye” is displayed, then the device is
switched off.
Switch on: When in the power-off state, press down the PLAY
button ( ) until the startup logo “PHILIPS” is displayed.
Note:
The device has a built-in lithium battery. If the device shall be
idle for a long time, please slide the power switch to OFF
position.
If the device cannot work normally, please make sure the
device is not out of electricity.
When the device is recording, please do not cut off the power,
otherwise damaged file or malfunction may be resulted.
When the battery indicator “ ” is displayed, please charge
the device promptly.
To Next Page
Loading...
