Philips VR610/07 - Turbo Timer recording and management

TURBO TIMER-RECORDING ENGLISH
34
34
5 The display shows the programme number to
which the video recorder is currently set,
e.g.:PROG. 01. Change  if necessary  the
displayed programme number with
==PP--
or
;;PP++..
Confirm with the
TTUURRBBOO TTIIMMEERR
button (or with
00--99
).The display briefly shows
the message OK
1 Press the
TTUURRBBOO TTIIMMEERR
button on the
remote control
TTuurrbboo TTiimmeerr--RReeccoorrddiinngg
2 The display shows the actual starting time,
e.g.:START 20:00. Change  if necessary 
the displayed start time with
==PP--
or
;;PP++
(or
with
00--99
)
3 Confirm with the
TTUURRBBOO TTIIMMEERR
button
4 The display shows a suggestion for the end of
the recording e.g.:END 22:00 (Start time +
2 hours). Change  if necessary  the
displayed finish time with
==PP--
or
;;PP++
(or with
00--99
)
..
Confirm with the
TTUURRBBOO TTIIMMEERR
button
Using the Turbo Timer, you can make a programmed
recording within the next 24 hours quickly and simply,
without having to switch on the TV set.All you need to
do now is enter or confirm the desired programme
number and start and finish time in the video recorder.
P01
20:00
22:00