Changing the TV system
If you play back recordings made on another video recorder,
the automatic TV system switch-over may lead to colour
interferences.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the menu
buttons P = or P ; and confirm with the P button.
d In the line ’TV SYSTEM’ select the required TV system
with the menu buttons Q or P .
e Confirm with the OK button.
f To end, press the MENU button.
DIf colour interference still occurs, you can switch to ’B/W’
(black and white) in line ’TV SYSTEM’.
Child lock
a With the video recorder switched on, press the
CHILD LOCK u button on the remote control for a few
seconds until ’{’ appears in the video recorder display.
Keep the remote control in a safe place.
b If you want to switch off the child lock, press the
CHILD LOCK u button again for a few seconds until ’{’
disappears from the video recorder display.
DIf a button is pressed with activated child lock, ’{’
flashes in the display for a few seconds.
DProgrammed recordings are made despite activated child
lock and cannot be interrupted.
You can also switch the child lock on and off with the menu
button P in the menu ’SPECIAL SETTINGS’, in line ’CHILD
LOCK’.
Setting the On Screen Display (OSD)
You can switch the On Screen Display of the current operating
information on or off.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the menu
buttons P = or P ; and confirm with the P button.
MAIN MENU
SPECIAL SETTINGS
} TV SYSTEM | PAL }
{ CHILD LOCK OFF
OSD MODE AUTO.
16:9 WIDE SCREEN OFF
VCR 1 OR 2 VCR 1
REPEAT PLAY OFF
AUTO STANDBY ON
DEMO OFF
________________________________
TO EXIT
PRESS MENU
d Select the line ’OSD MODE’ with the menu buttons P = or
P ; .
e Select one of the options indicated with the menu buttons
P or Q .
’AUTO.’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’OFF’: OSD is switched off.
’ON’: OSD is switched on.
f Confirm with the OK button.
g To end, press the MENU button.
DWith the OK button you can superimpose the On Screen
Display of current operating mode on the TV screen.
5. ADDITIONAL FUNCTIONS
15
To Next Page
Loading...
