Philips VRB412AT - Hi-Fi Stereo Sound System (VRB612 Only) 45

VOL
CH
321
654
987
0
POWER
STATUS/EXIT
MEMORY SLOWREC/OTR
SPEED
TIME SEARCH
ALT. CH
PAUSE/STILL
MUTE
TV
CBL/DBS
VCR
F.FWDREW
PLAY
STOP
VCR/TV EJECT
MENU
CLEAR
ENTER
Hi-Fi Stereo Sound System (VRB612 only) 45
1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
AUDIO OUT, then press the F.FWD/B button.
Multi-Channel Television Sound system broadcasts are automati-
cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the
tapes recorded in Hi-Fi stereo, however, you’ll need to follow
steps 1-5.
SELECT op
→ HIFI ON
MONO
TO END PUSH EXIT
SELECT op CHOOSE B
→ REPEAT PLAY OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded
in Hi-Fi stereo.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps 1-3.
At step 4, press the PLAY/o button
or the STOP/p button to select
MONO. Press the STATUS/EXIT
button. HIFI will disappear from the
status display during TV viewing.
• If you play non-Hi-Fi tapes while the
VCR is set to HIFI, the tape will play
in monaural sound.
Please see additional notes
on page 48.
Helpful Hints
1
2-4
5
4
Press the PLAY/o button or the STOP/p button to select
HIFI. ON will appear to the right of HIFI on the screen.
5
Press the STATUS/EXIT button.
SELECT op
→ HIFI ON
MONO
TO END PUSH EXIT