Philips WACS700 Upgrade Manual

Philips WACS700 hard drive upgrade
Please note that this procedure will invalidate any warranty on the unit.
Any errors or omissions are not accepted by the author, if you follow this guide any responsibility for damage to the unit is your responsibility.
Soldering is required in this procedure, if you are not competent do not try it.
Disconnect the unit from the mains power supply.
Figure 1, centre base of WACS700
Remove the two torx screws circled in figure 1 and remove the plastic cover; this exposes the speaker connectors in figure 2.

Philips WACS700 Specifications

General

Tuner type	Digital
Supported radio bands	FM
Preset stations quantity	40
Bass reflex	No
Speaker type	-
RMS rated power	100 W
Display type	LCD
Backlight color	White
MP3 bit rates	8 - 320 Kbit/s
WMA bit rates	16 - 128 Kbit/s
Display resolution	128 x 96 pixels
Apple docking compatibility	Not supported
On Screen Display (OSD) languages	DEU, DUT, ENG, ESP, FRE, ITA
Product color	Black, Silver
Number of decks	1 deck(s)
HDD capacity	40 GB
Storage media type	HDD
Headphone outputs	1
Headphone connectivity	3.5 mm
Playback modes	Fast backward, Fast forward, Next, Previous, Repeat, Shuffle
Disc types supported	CD, CD-R, CD-RW
Playback disc formats	CD audio
Audio formats supported	MP3, PCM, WMA
Equalizer modes	Classic, Jazz, Pop, Rock, Techno
Programmable tracks	99
Power consumption (standby)	1 W
Cables included	UTP

Weight and Dimensions

Package depth	381 mm
Package width	674 mm
Package height	376 mm
Package weight	14000 g