Philips WACS700 Firmware Upgrade Guide

1. Introduction
The Firmware Upgrade will upgrade WAC700 & WACS700’s firmware to
Version 1.2.10.
__________________________________________________________________
2. Key features added
The software release 1.2.10 has provided a solution for CD ejection problem that
has happened on a marginal number of CDs.
__________________________________________________________________
3. Preparation
i) Verifying firmware version
Before upgrading, check the firmware version.
1. Turn on your WAC700 Center
2. Press MENU
3. Press ▲/▼ to select “Information”. Press OK
→ The display shows the FW (firmware) version number
→ Upgrading is necessary if the FW version is an earlier one
Note: The firmware information is also useful when you call Philips Customer
Care Center.
ii) Checking Wi-Fi connection
Wi-Fi connection between Center and Station:
- Check you have pressed STANDBY-ON to turn on WAC700 Center and
WAS700 Station
- On Station, check you can playback tracks in HD mode
- On Station, check the signal indication shows maximum reception

Philips WACS700 Specifications

General

Tuner type	Digital
Supported radio bands	FM
Preset stations quantity	40
Bass reflex	No
Speaker type	-
RMS rated power	100 W
Display type	LCD
Backlight color	White
MP3 bit rates	8 - 320 Kbit/s
WMA bit rates	16 - 128 Kbit/s
Display resolution	128 x 96 pixels
Apple docking compatibility	Not supported
On Screen Display (OSD) languages	DEU, DUT, ENG, ESP, FRE, ITA
Product color	Black, Silver
Number of decks	1 deck(s)
HDD capacity	40 GB
Storage media type	HDD
Headphone outputs	1
Headphone connectivity	3.5 mm
Playback modes	Fast backward, Fast forward, Next, Previous, Repeat, Shuffle
Disc types supported	CD, CD-R, CD-RW
Playback disc formats	CD audio
Audio formats supported	MP3, PCM, WMA
Equalizer modes	Classic, Jazz, Pop, Rock, Techno
Programmable tracks	99
Power consumption (standby)	1 W
Cables included	UTP

Weight and Dimensions

Package depth	381 mm
Package width	674 mm
Package height	376 mm
Package weight	14000 g