Philips WACS7000 Connecting Guide

PC StationCenterAccess Point
1
2
Wireless Music Center + Station WACS7000
Connect to your PC
Connect Philips Wireless Music Center to your PC if you want to do
the following:
● Access music files stored on your PC from Philips Music Center/
Station’s UPnP source
● Manage the music content stored on Philips Music Center from your
PC
● Update Center’s Gracenote
®
music recognition service database for
the latest disc information
● Upgrade firmware of Philips Music Center + Station
GB
To connect to Philips Music Center, your minimum PC requirements must be:
UPnP playback
● Windows 2000/XP (Home or Professional)
● Pentium III 500MHz processor or higher
● 256MB RAM
● CD-ROM Drive
● Ethernet Adapter (for wired connection)/ Wireless
Network Adaptor 802.11 b/g (for wireless connection)
● Free hard disk space of 500MB
● Windows Media Player® 9.0 or later installed
Set up connection between Center and your PC
WIRED WIRELESS
Connect supplied
(Orange) Ethernet
cable from Center to
your PC
1
Install Wireless Audio Device Manager (WADM)
and Philips Media Manager (PMM)
Launch WADM. Is your connection established?
2
YES
Congratulations!
Connection between
Center and your PC
is successful!
NO
Build new connection
OR
Check your network
settings
Use WADM
Use UPnP
Set up a wired connection
ETHERNET
LAN
Set up a wireless connection
PC StationCenterAccess Point
1
2
PC
Station
Center
1
2
3
Connect Center to PC directly with the supplied (orange) Ethernet
cable
OR
Connect Center directly to Access Point with the supplied (orange)
Ethernet cable
After WADM is installed, launch WADM
● connection is made if Center is found
● build new connection if Center is not found
1
2
a. On Center :
● Press the MENU button
● Select Settings>Network >
Wireless > (Select desired net-
work) >
(Input the encryption key) >
Automatic > Apply Settings >
Yes
1
Tips:
● Make sure that Ethernet port is 'Enabled' to make WADM connection.
For more information, see
B
For more information, see
C
a. On Center :
● Select HD source, and then
press the MENU button
● Select Station Mgnt > Add
New Station
b. On Station :
● Press the MENU button
● Select Installation Mode
2
a. Enable your wireless
Access Point/router
b. Configure Network from
Center :
Select MENU>Settings
>Network > Wireless > (Select
desired network) > (Input the
encryption key) > Automatic >
Apply Settings > Yes
a. Center: Enter Installation
Mode
b. Station: Enter Installation
Mode
1
2
For more information, see
A
Do you want to connect wired or wirelessly?
Do you have a wireless Access Point?
YES
NO
a. On Center :
● Press the MENU button
● Select Information > WiFi >
WEP Key to retrieve WEP key
b. On PC :
● Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
Center’s network > Input
retrieved Center’s WEP key
1
a. On Center :
● Select HD source, and then
press the MENU button
● Select Station Mgnt > Add
New Station
b. On Station :
● Press the MENU button
● Select Installation Mode
2
Tips:
● Check that PC’s wireless network adaptor is working.
● Locate Center closer to your wireless Access Point.
● Make sure that DHCP is enabled on your wireless Access Point.
If not available, choose Static and key in IP configuration
WACS7000_CPC-Eng 2006.8.11 14:00 Page 1

Philips WACS7000 Specifications

General

Supported radio bands	FM
Backlight color	White
Backlight display	Yes
Channels quantity	60 channels
MP3 bit rates	8 - 320 Kbit/s
WMA bit rates	16 - 128 Kbit/s
Internal memory	80 MB
Headphone connectivity	3.5 mm
Master (outer) case weight	15.5 g

Weight and Dimensions

Weight	12.93 g
Case or master carton weight	15.5 kg