Philips WelcomeEye Link - Page 15

WelcomeEye / Link
13
Step 3:
Check that the micro SD card is there, if you did not do so while carrying out tests
on a table.
32
Gb
Step 3a (optional): If you wish, you can connect a gate motor drive or an electric strike
plate to the back of your intercom panel so that you can control them from the smart-
phone application.
230 VAC 50 Hz
Power supply to
be adapted to the
connected electric
strike plate
(not supplied)
Gate motor drive
with dry-contact
wired control input
(not included)