Philips XZ5800 - Page 23

3 Pull the shaving head holder off the bottom
part of the shaving unit.
1
2
4 Turn the retaining rings counterclockwise and
remove them. Place them aside in a safe place.
5 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
6 Place the new shaving heads in the shaving
head holder.
Note: Make sure that the projections of the
shaving heads fit exactly into the recesses of
the shaving head holder.
23
English