Safety
Helmets and Local Laws
Always wear a helmet when riding your eBike. Ensure that the
helmet fits your head and is securely tightened down. Before
riding, read local laws and comply with all rules relating to
cycling and eBiking in your area. If you attach a seat for children
to the bike, they must also be wearing a properly fitted helmet at
all times.
Pre-ride Safety Check and Inspection
Before each ride, make sure to inspect your eBike to ensure there
are no loose fasteners or accessories. Make sure to specifically
check that both the front and rear axles are secure. Also, make
sure both the handlebar and the handlebar stem are not loose.
Check the tire pressure of both wheels before riding to ensure
the tires are inflated to the recommended pressure printed on
the side of the tire walls. Pull the brake levers to make sure your
brakes are working properly and adjust if necessary. Ensure both
your seat post and handlebar stem are inserted past their
minimum insertions points as indicated by the markings on them.
Riding in Wet Conditions
This electric bicycle can withstand light rain and small splashes,
but is not designed to be subjected to inclement weather,
extremely heavy showers, or submersion in water.
Use caution when riding in wet conditions as it will take longer to
use the brakes to slow down, and also when turning as the tires
may slip. The electrical components on the bike are not waterproof.
The entire bike has an IP rating of 54. Water damage is not covered
under warranty.
To Next Page
Loading...
