Phiradar FF668W-BG User Manual

Powers the unit on/off and initiates shutdown.

Controls navigation and selection within menus and screens.

Accesses the main menu system for settings and configurations.

Switches between frequencies or exits current menu/screen.

Displays the current measured depth of the water.

Represents the shape and structure of the underwater bottom.

Visual representation of detected fish on the display.

Visual guide for reading depth values on the display.

Shows the area of the full range view displayed in the zoomed view.

Indicator to stop and recover the screen chart display.

Allows switching between different sonar frequencies (200KHz, 83KHz).

Accesses the 'Sonar' settings for the device.

Accesses the 'Setup' menu for device configurations.

Accesses the 'Advance' menu for specialized settings.

Adjusts the display range to focus on specific depth zones.

Indicates the depth at which fish are detected.

Visual representation of detected fish on the screen.

Allows pinpointing the depth of a target on the screen.

Visual cue on screen when the simulator function is active.

Adjusts the screen brightness and frontlight.

Sets the alarm volume level.

Selects display units for depth, temperature, etc.

Controls the rate echoes scroll across the screen.

Configures alerts for different sizes of fish.

Sets alerts for shallow water conditions.

Configures alerts for low battery voltage.

Adjusts the dialog box transparency for better visibility.

Filters surface clutter noise for clearer readings.

Adjusts the system to minimize interference and noise.

Allows selection of the menu display language.

Step-by-step guide to reset communication between receiver and transmitter.