27
Check the water supply device and the release often. You should avoid the condition of no water or air entering
into system, as this will influence unit's performance and reliability. You should clear the pool/spa filter regularly
to avoid damage to the unit as a result of the dirty of clogged filter.
The area around the unit should be dry, clean and well ventilated. Clean the side heating exchanger
regularly to maintain good heat exchange as conserve energy .
The operation pressure of the refrigerant system should only be serviced by a certified technician .
Discharge all water in the water pump and water system ,so that freezing of the water in the pump or water
system does not occur. You should discharge the water at the bottom of water pump if the unit will not be
used for an extended period of time. You should check the unit thoroughly and fill the system with water
fully before using it for the first time after a prolonged period of no usage.
Check the power supply and cable connection often,.Should the unit begin to operate abnormally,
switch it off and contact your certified technician.
5.1 Maintenance
5. MAINTENANCE AND INSPECTION
To Next Page
Loading...