RF ECO BT System Quick Guide
30.11.2016 Id-No. 85648(-) 1 / 6
System overview: RF ECO BT / OKIMAT 4 / RF-TOPLINE / RF-ECO
CAUTION! Electrical components should be connected or disconnected only when the power supply cord is unplugged.
CAUTION! There is a delay after the supply voltage is applied before the device actually turns on. Wait at least two seconds before beginning the commissioning.
Components that can be connected:
1. RF ECO BT
2. OKIMAT 4
3. Mains supply plug EU Version
4. RF-TOPLINE
or
5. RF ECO
To Next Page
Need help?
General