EasyManua.ls Logo

Phoenix 301 - Product Specifications

Phoenix 301
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
UBS interface (mini B connector)
3.5mm external loudspeaker and
microphone jack
Volume Up / Volume Down buttons
Daisy chain expandability of up to 15
units
Three-way bridging capability
7 hours of battery talk time w/secondary
interface (302/303)
Frequency Response 50Hz – 16KHz
Low latency (10ms)
Broadcast level (peak): 92dB SPL @1m
(5 watts RMS)
Noise cancelation > 10dB (without
pumping noise)
100% full duplex no attenuation (in
either direction) during full duplex
High end performance confirms to ITU-T
G.167
Acoustic echo cancelation > 40dB with
conversion speed of 40dB/sec
Residual echo is suppressed to the
environment noise level, preventing
artificial ducking of signal
4 high quality directional microphones
Direction finding algorithm (determines
the presence and direction of a speaker)
Beam forming algorithm (forms and
directs audio beams towards a defined
direction)
Automatic voice level adjustment (AGC)
Line echo canceler active when
telephone interface is present
Metal case and metal grill mesh for high
RFI immunity and product durability
Dimension: 7” diameter, 1-7/8” height
Weight: 1.2 lbs (with no secondary interface)
Power Consumption:
5V 500mA peak through USB, internal battery or
wall mount AC/DC converted (supplied with
relevant models).
Software:
Plug-and-Play - No installation or drivers.
Note: Audio Setup Utility is available for
Windows. The setup utility helps monitor the
audio input and output level but is not required.
Operating systems: Windows 98 and up /
Linux / MacOS.
Complies with FCC 47 CFR Part 68, and ACTA
adopted technical criteria: TIA-968-A
Complies with FCC 47CFR part 15; ICES-003:
2004 Issue 4, Class B; AS/NZS CISPR 22:
2006, Class B; EN 55022: 1998+A1(00)+A2(03),
Class B;, EN61000-3-2: 2000+A2(05);
EN61000-3-3: 1995+A2(05); EN55024:
1998+A1(01)+A2(03)
Complies with ETSI EG 201 121 V1.1.3 (2000-
02); ETSI ES 203 021-2 V2.1.2 (2006-01); ETSI
ES 203 021-3 V2.1.2 (2006-01)
Conforms to the requirement of the European
Union Directive 2002/95EC (RoHS Directive)

Related product manuals