PHOENIX METAL PRODUCTS, INC
TL600/TL700 LAVATORY SERVICE TRUCK
6
MAY 2018
INTRODUCTION
THE TL600 IS DESIGNED TO SERVICE THE LAVATORY SYSTEMS OF ALL MAJOR COMMERCIAL
AND MILITARY AIRCRAFT FITTED WITH COMMERCIAL LAVATORIES. THE TL600 IS MOUNTED ON
A COMMERCIAL CHASSIS. AN ISUZU CAB OVER MODEL NPR , POWERED BY A TURBOCHARGED
AIR COOLED INLINE FOUR CYLINDER DIRECT INJECTION DIESEL ENGINE. ALL FEATURES FOUND
ON HIGHWAY VEHICLES ARE INCORPORATED IN THIS CHASSIS.
THE TL600 IS A MODULAR UNIT WITH 2 TANKS SURROUNDED BY A STAINLESS STEEL SHROUD.
CONTROLS FOR PUMPING, LIGHTS AND MEASUREMENT OF CHARGING FLUIDS ARE LOCATED
ON THE TOP DECK. IF A LIFT IS INSTALLED THERE IS A SET OF CONTROLS ON THE LIFT PLAT-
FORM. LIGHTS ARE SUPPLIED FOR NIGHT OPERATIONS. THIS PUBLICATION PROVIDES OPERAT-
ING, SERVICING, MAINTENANCE INSTRUCTIONS AND DETAILED PARTS LIST FOR THE TL600
LAVATORY SERVICE TRUCK. FULL FAMILIARIZATION OF THIS PUBLICATION SHOULD BE
ACQUIRED PRIOR TO OPERATING, SERVICING OR PERFORMING MAINTENANCE ON THIS
VEHICLE.
Property of American Airlines
To Next Page
Loading...
General