16
4. Adjusting and removing Lyric
4.2 Putting Lyric in SLEEP mode
쐍 While the hearing aid is ON, hold the magnet inside
the ear canal without touching the hearing aid.
쐍 Wait until you hear 2 beeps.
쐍 Immediately remove the magnet from your ear.
Note: Sleep mode is a setting for acoustic transparency.
In this setting, Lyric compensates the damping caused
by the hearing aid itself. It sounds like you are not
wearing a hearing aid.
4.3. Turning Lyric OFF
쐍 While the hearing aid is ON, hold the magnet inside
the ear canal without touching the hearing aid.
쐍 Wait until you hear 2 beeps.
쐍 Continue to hold the magnet in place until you hear
4 more beeps. (There is a short pause between the
fi rst 2 and the last 4 beeps).
To Next Page
